; Bosie Bence Cloverdale Section #1 ; ;No. Circuits No. Phases Length Frequency Gnd. R. No. Bundles 1 3 3.20000E+00 6.00000E+01 1.00000E+02 1 ; ; Circuit 1 ;P NB Bundle Rad Resistance Diameter GMR Heigth Sag Horz. X A 1 1.00000E+00 7.59000E-02 1.34500E+00 4.45000E-02 5.50000E+01 0.00000E+00 1.00000E-03 B 1 1.00000E+00 7.59000E-02 1.34500E+00 4.45000E-02 4.25000E+01 0.00000E+00 0.00000E+00 C 1 1.00000E+00 7.59000E-02 1.34500E+00 4.45000E-02 3.00000E+01 0.00000E+00 -1.00000E-03 S1 0 1.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 S2 0 1.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 0.00000E+00 Circuit 1 PC-EMTP line parameters for total line length Circuit Average Self and Mutual R-L-C, XL and XC Rs= 5.38205E-01 Ls= 1.14045E-02 Cs= 4.32989E-08 XLs= 4.29940E+00 XCs= 6.12621E+04 Rm= 2.95306E-01 Lm= 5.35954E-03 Cm=-8.14337E-09 XLm= 2.02050E+00 XCm=-3.25735E+05 Sequence Impedance - Distributed Line Parameter Model R zero = 1.12882E+00 L zero = 2.21236E-02 C zero = 2.70121E-08 XL zero = 8.34040E+00 XC zero = 9.81996E+04 R pos = 2.42899E-01 L pos = 6.04499E-03 C pos = 5.14422E-08 XL pos = 2.27891E+00 XC pos = 5.15643E+04 R neg = R pos, L Neg = L pos, and C neg = C pos Model Surge Impedance - Distributed Line Parameter Model Z0= 9.09116E+02 at -3.85388E+00 deg. Travel speed = 1.30901E+05 miles/sec Z1= 3.43767E+02 at -3.04197E+00 deg. Travel speed = 1.81465E+05 miles/sec Circuit 1 Z11 matrix, R in ohms, L in henries 1 R 5.35522E-01 2.93962E-01 2.95300E-01 1 L 1.14124E-02 5.60144E-03 4.88359E-03 2 R 2.93962E-01 5.38180E-01 2.96656E-01 2 L 5.60144E-03 1.14045E-02 5.59358E-03 3 R 2.95300E-01 2.96656E-01 5.40913E-01 3 L 4.88359E-03 5.59358E-03 1.13966E-02 Circuit 1 C11 Capacitance Matrix in farads. 1 C 4.13737E-08 -1.04962E-08 -4.61314E-09 2 C -1.04962E-08 4.42963E-08 -9.32076E-09 3 C -4.61314E-09 -9.32076E-09 4.42266E-08 ---------------------------------------------------------------------------- Circuit 1 Pi-Section - Mutually Coupled Line Model Format (Absolute) Type Ns Nd R L C Sw Nc Limit ID 3 NAs NAd 5.35522E-01 1.14124E-02 4.13737E-08 0 / 0.000E+00 0 2.93962E-01 5.60144E-03 -1.04962E-08 2.95300E-01 4.88359E-03 -4.61314E-09 2 NBs NBd 5.38180E-01 1.14045E-02 4.42963E-08 0 / 0.000E+00 0 2.96656E-01 5.59358E-03 -9.32076E-09 1 NCs NCd 5.40913E-01 1.13966E-02 4.42266E-08 0 / 0.000E+00 0 Circuit 1 Pi-Section - Mutually Coupled Line Model Format (OHMS) Type Ns Nd R jXL -jXC Sw Nc Limit ID J 3 NAs NAd 5.35522E-01 4.30237E+00 6.41128E+04 0 / 0.000E+00 0 2.93962E-01 2.11169E+00 -2.52718E+05 2.95300E-01 1.84107E+00 -5.75006E+05 J 2 NBs NBd 5.38180E-01 4.29941E+00 5.98827E+04 0 / 0.000E+00 0 2.96656E-01 2.10873E+00 -2.84589E+05 J 1 NCs NCd 5.40913E-01 4.29643E+00 5.99770E+04 0 / 0.000E+00 0 NOTE: The in the first column flags the PC-EMTP that the jXL and -jXC fields are in ohms at the system pre-fault frequency. Circuit 1 Distributed Parameter - Mutually Coupled Line Model Format (Absolute) Type Ns Nd R L C Sw Nc Limit ID 3 NAs NAd 1.12882E+00 2.21236E-02 2.70121E-08 0 / 0.000E+00 0 2 NBs NBd 2.42899E-01 6.04499E-03 5.14422E-08 0 / 0.000E+00 0 1 NCs NCd 0 / 0.000E+00 0 Circuit 1 Distributed Parameter - Mutually Coupled Line Model Format (OHMS) Type Ns Nd R Z Tau Sw Nc Limit ID J 3 NAs NAd 1.12882E+00 9.09116E+02 2.44460E+01 0 / 0.000E+00 0 J 2 NBs NBd 2.42899E-01 3.43767E+02 1.76343E+01 0 / 0.000E+00 0 J 1 NCs NCd 0 / 0.000E+00 0 NOTE: The in the first column flags the PC-EMTP that the L field is Z0 or Z1 ohms and the C field is Tau0 or Tau1 microseconds.